Clone Mode - Uniden UBCT9 Owner's Manual

Start Remote Mode and Change Transfer Speed:
1. Press and hold RMT for 2 seconds to activate the Remote
mode.
2. Select the transfer speed except for
the scanner will start Remote mode.
A unique feature of the UBCT9 is that all the front panel keys on the radio remain
operational in Remote mode.
PC Control Parameter
For your information:
Transfer speed : 9600/19200/38400/57600 bps (adjustable)
Start/Stop bit
Data Length
Parity Check
Code
Flow Control
Return Code

Clone Mode

You will need to purchase a RS232C straight cable and a null modem adapter. RS232C
straight cables are available as male to male or male to female. Even if the RS232C
straight cable you buy already has the male to male connectors, you will still have to have
the null modem adapter. On the next page you will see the pin connections that are internal
to a standard device. (These items are available at your local electronics stores.)
UBCT9 OM 49
, then press E and
: 1 bit, 1 bit
: 8 bit
: None
: ASCII code
: None
: Carriage Return only
4
12/11/07 3:54:02 PM