Xerox WORKCENTRE M118 Remanufacturing Instructions page 4
Drum cartridge remanufacturing
Hide thumbs
Also See for WORKCENTRE M118:
- Getting started manual (25 pages) ,
- Quick setup manual (5 pages) ,
- User manual (230 pages)
Advertisement
XEROX WORKCENTRE M118 • 128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
4. On the non gear side, remove the four screws from the end cap.
Remove the end cap.
5. On the large gear side, remove the metal plate and the drum bushing.
www.uninetimaging.com
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
