Table of Contents
Advertisement
UB324 Paper OM reduced size.fm Page 35 Wednesday, February 2, 2005 8:01 PM
If you enter a frequency that is out of range, the
scanner sounds an error tone and Error appears.
Press Func +
to change the search direction down-
ward or Func +
to change the search direction
upward. Frequencies appear during the search.
Notes:
•
You can set the delay function on or off during
the search or while the search stops.
•
You can skip a frequency when the search stops.
After the search skip frequency is set, the scan-
ner starts direct search again.
Direct Entry Search Hold Mode
To stop searching during direct entry search, press Hold.
Hold appears. In this mode, pressing Func +
changes the search direction downward and press-
ing Func +
changes the search direction upward.
or
appears depending on the search direction.
Press Func +
to decrease the frequency by one
step or Func +
to increase it by one step. Hold
down
or
for about 1 second to quickly increase
or decrease the frequency.
To resume direct search, press Func + Src or Hold.
or
appears on the display, showing the search
direction.
Storing Frequencies Found During Direct
Entry Search into Channel Memory
Follow these steps to store frequencies received
during direct entry search mode or direct entry
search hold mode.
1. Press Func + Pgm in direct entry search mode
or direct entry search hold mode. The frequency
Special Features
35
Hide quick links:
Advertisement
Table of Contents
