2. Enter the frequency you want to start from by
using the number keys. (Press
decimal point).
3. Press Func +
searches, starting from the frequency you
entered in Step 2.
If you enter a frequency that is out of range, the
scanner sounds an error tone and Error appears.
Press Func +
downward or Func +
direction upward. Frequencies appear during the
search.
Notes:
•
You can set the delay function on or off during
the search or while the search stops.
•
You can skip a frequency when the search stops.
After the search skip frequency is set, the scan-
ner starts direct search again.
Direct Entry Search Hold Mode
To stop searching during direct entry search, press
Hold. Hold appears. In this mode, pressing Func +
changes the search direction downward and
pressing Func +
upward.
direction.
Press Func +
step or Func +
down
or
increase or decrease the frequency.
To resume direct search, press Func + Src or Hold.
or
appears on the display, showing the search
direction.
or Func +
to change the search direction
changes the search direction
or
appears depending on the search
to decrease the frequency by one
to increase it by one step. Hold
for about 1 second to quickly
. The scanner
to change the search
Special Features
41
to enter a