Attaching The Belt Clip; Attaching The Wrist Strap; A Look At The Keypad - Uniden UBC396T Owner's Manual

Uniden owner's manual scanner ubc396t
Table of Contents

Advertisement

WARNING!
Never connect any part of the headphone jack to
the antenna jack or connect the radio to an
installation where the antenna and audio
connection are grounded. This might damage the
scanner.

Attaching the Belt Clip

To make your scanner easier to carry when you are on
the go, use the supplied belt clip. Rotate the scanner
upside down to remove it from the clip.

Attaching the Wrist Strap

To keep your scanner safely close at hand, use the
supplied wrist strap. Push the small loop on one end of
the wrist strap through the lug on the right side of the
scanner, then thread the other end of the wrist strap
back through the small loop to secure it.

A Look At The Keypad

Your scanner's keys have various functions labeled on
the key tops and below the keys.
To select the function labeled on a key, simply press
the key. To select the function labeled below a key,
hold down
on the left side of the scanner then
Func
F
press the key.
appears on the display.
36
Setting Up Your Scanner

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bcd396t

Table of Contents