Deleting Systems; Copying Systems - Uniden UBC396T Owner's Manual

Setting System Attenuation
(Trunked Systems Only)
Program System
Menu
Select the system
Set Attenuator
This setting controls whether the attenuator will be on
or off for the current system. Select your setting then
press E.
Off - the attenuator is off.
On - system frequencies are attenuated by about 18
dB.
Notes:
• Turn on this setting if you are near strong signal
sources. Attenuation can help reduce interference
and desensitization that strong signals create.
• You can also turn this setting on or off by holding
on a trunked system, then pressing

Deleting Systems

Program System
Menu
Select the system
Delete System
The scanner prompts you to confirm deletion.
To confirm, press E. To cancel, press
Notes:
• Deleted systems cannot be restored. You must
re-enter them.
• You cannot restore preloaded systems.

Copying Systems

To copy a system including all settings, groups, and
channels:
Programming/Editing Optional Settings
+ E.
Func
.
83