Programming Channels With Alpha Characters - Uniden SC200 Operating Manual

2.
Use the
see the Band you want.
3.
Wait for at least 2 seconds or press
Search to begin. If you wish to change the search
direction, press and hold
up or down direction.
4.
When Search stops on a desired frequency, press
or to stay on that frequency.
5.
To store the displayed frequency into a channel:
Select the channel number with the numeric keys, and
press
display. The frequency currently stored in the channel
will appear for 2 seconds and then will be replaced by
the frequency located from the search.
6.
To store the displayed frequency into that channel,
press
programming. The next available empty channel to
store the frequency will be blinking on the display.

Programming Channels with Alpha Characters

Use this feature to name channels (up to 200 channels) for
easy reference.
1.
Select the channel.
2.
Press
" " appears on the display.
3.
Press
Note: If the frequency of the channel has not been
programmed, you cannot program the Alpha Name on
the channel.
4.
To select the edit position, press
cursor to the right or
and
. The selected channel will appear on the
. The frequency will blink twice to confirm the
/ ALERT to go to the Alpha Name display,
. The Edit cursor flashes.
keys or VFO control until you
or
to move it to the left.
21
/ BAND for
to search in an
to move the Edit