Uniden SC200 Operating Manual page 14

ATT
CTCSS
CDCSS
2. Press
channels that are not locked out. (SCAN moves
across the display during scanning.)
3. In SCAN and WX or SEARCH Mode, press
stop scanning. (HOLD appears on the display.)
In Manual mode, press
channel.
4. NUMERIC KEYPAD — Use these keys to program a
channel for scanning. Also use to access a channel
directly with
keys to select or deselect any of the 10 memory
banks. (Only the selected bank indicator(s) appear
on the display.)
Note: You cannot deactivate all 10 banks at the
same time.
Appears when the Attenuator
function is set.
Indicates the keypad is locked.
Appears when the display mode is
Alpha Name mode.
Appears when the Subaudible Tone
function is turned on and a CTCSS
tone is associated on the display
channel.
Appears when the Subaudible Tone
function is turned on and a CDCSS
tone is associated on the display
channel.
to start scanning all programmed
. During SCAN Mode, use these
Key Bank Channel
1
2
3
4
5
6
7
8
9
10
12
to step up the
1 - 20
21 - 40
41 - 60
61 - 80
81 - 100
101 - 120
121 - 140
141 - 160
161 - 180
181 - 200
to