Table of Contents
Advertisement
Connecting the Power
The LRD 737 is designed to operate on most 13.8 VDC negative ground
vehicle electrical systems. The power cord provided with the unit has a
cigarette lighter socket plug at one end and a small connector at the other.
1.
Insert the small connector into the jack on the side of the unit.
2.
Insert the other end into the cigarette lighter socket of your
vehicle.
When installing the power cord, make sure that:
The socket is clean to allow proper contact.
The power cord does not block the antenna area on the back of
the unit.
Your unit also comes with power cord mounting clips. You can use these
clips to attach the power cord to the window frame or other parts of the
vehicle, keeping it neat and out of the way. Use the double-sided foam
tape squares to attach each clip. Slip the power cord into the clip to hold
it securely in place.
11
Advertisement
Table of Contents
