Connecting The Power; Using The Cigarette Lighter Adapter - Uniden Owner's Manual

Connecting the Power

Using the Cigarette Lighter Adapter

A coiled power cord provided with the unit has a cigarette
lighter socket plug at one end and a small connector at the other.
1. Insert the small connector into the 12V DC power input on
the side of the unit.
2. Insert the other end into the cigarette lighter socket of your
vehicle.
When installing the power cord, make sure that:
• The socket is clean to allow proper contact.
• The power cord does not block the antenna area.
Your unit also comes with ten power cord mounting clips. You
can use these clips to attach the power cord to the window frame
or other parts of the vehicle, keeping it neat and out of the way.
Use the double-sided foam tape squares to attach each clip. Slip
the power cord into the clip to hold it securely in place.
11