Install And Turn On Dfr9; Install/Power On; Windshield; Dashboard - Uniden DFR9 Detailed User's Manual

INSTALL AND TURN ON DFR9

You can mount the DFR9 on the windshield (bracket included) or on the
dashboard (hook and loop tape included).

INSTALL/POWER ON

Windshield

When you mount the DFR9 on the windshield, mount it in the middle of
the windshield between the driver and passenger. Be sure there are no
obstructions and that there is a clear view through the back window.
1. Attach the rubber suction cups to the bracket and push the cups firmly
onto the windshield.
2. Slide the unit onto the bracket until it clicks into place.
3. Plug the power cord RJ11 connector into the DFR9 and plug the
cigarette lighter adapter into the vehicle's cigarette lighter.
4. The DFR9 automatically turns on and runs through a self test cycle.
Release the DFR9 from the bracket by pressing the Eject key on top of the

Dashboard

The same types of mounting requirements for the windshield apply for
mounting the unit on the dashboard.
1. Attach the unit to the dashboard using the hook and loop fastener
tape.
2. Plug the power cord RJ11 connector into the DFR9 and plug the
cigarette lighter adapter into the vehicle's cigarette lighter.
3. The DFR9 automatically turns on and runs through a self test cycle.
Pull the DFR9 from the dashboard, separating the hook and loop tape.
detector.
-6 -