Setting The Receiver Board - Furuno DSC-60 Service Manual

3.5 Setting the receiver board

A FAX-5+2.6m whip active antenna is usually used to receive DSC distress signal and DSC general
signal.
Set J3 on the RX board to ACTIVE to apply voltage to the antenna.
J2
Ref.OSC
455kHz
FIL
2. System setup(Setting DIP Swithes)
ANT
J3
4-21
ACTIVE
J3 Setting : ACTIVE J3 Setting : ACTIVE J3 Setting : ACTIVE
J3 Setting : ACTIVE J3 Setting : ACTIVE