Troubleshooting - Uniden EXAI 7248 SERIES Owner's Manual

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.
Symptom
The charge in use LED won't
illuminate when the handset is
placed in the base.
The audio sounds weak and/or
scratchy.
Can't make or receive calls.
w w w . u n i d e n . c o m
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset are clean.
• Move the handset and/or base away from metal objects or appliances and try again.
• Press the delete/channel key in the Talk mode to help eliminate background noise.
• Make sure that the handset is not too far from the base.
• Check both ends of the telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes. Then reconnect it.
• Change the digital security code (see page 50).
• Make sure that the handset is not too far from the base.
• Check the dialing mode used by your telephone company.
Suggestion
A D D I T I O N A L I N F O R M A T I O N [ 5 4 ]