Entering Your Area Code - Uniden EXAI 7248 SERIES Owner's Manual

2) Press the /vol/
3) Press the select/remote key to toggle and turn on Caller ID on Call
Waiting.
4) Press the end key and return the handset to the base unit to complete the setting. The
handset returns to standby mode.

Entering Your Area Code

If you enter a 3-digit area code number in the
appear in Caller ID messages. Do not program this option if your calling area requires 10-digit
dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For
calls received from outside your local area code, you will see a full 10-digit number.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the /vol/
3) Press the select/remote key. If an area code was already stored,
the phone will display it.
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you
make an error, use the delete/channel key to backspace.
5) Press the select/remote key. A confirmation tone sounds.
w w w . u n i d e n . c o m
key to select .
C IDC W
Ar ea Cod e
key twice to select
Ar ea Cod e
option, your local area code does not
.
G E T T I N G S T A R T E D [ 1 2 ]