Note On Power Sources - Uniden EXAI 7248 SERIES Owner's Manual

Note on Power Sources

Low battery alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not in
use, appears on the LCD and none of the keys will operate.
L ow Bat ter y
If the phone is in use,
conversation as quickly as possible and return the handset to the base unit for
charging.
Information stored in the phone's memory will be retained for 30 minutes after
the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, RocketDial
programming, and the CID list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum
performance, be sure to return the handset to the base unit after a telephone call.
Battery replacement and handling
When the operating time becomes short even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden
Parts Department for a replacement battery.
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden
battery model and Uniden adapter model specifically designated for this product.
Power Failure
During the period that the power is off, you will not
be able to make or receive calls with the telephone.
[ 5 1 ] A D D I T I O N A L I N F O R M A T I O N
flashes and the handset beeps. Complete your
Low Ba tte ry
• Use only the specified Uniden battery pack (BT-905).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Caution
w w w . u n i d e n . c o m