To do this...
Adjust the volume
Activate voice dialing
With the phone in standby, press and hold MFB for 2 seconds then release.
When you hear a beep, start using your phone's voice commands. (Your
phone must support voice dialing, and all commands must be pre-
programmed.)
To deactivate voice dialing, press and hold MFB for 2 seconds until you hear
a beep.
Troubleshooting and Maintenance
If you have problems with the headset, see the suggestions in the table
below. If these suggestions don't help, contact customer support (see the
cover for contact information).
10
Do this...
Volume
Press the
button. There are 6 volume levels that cycle
as the Volume button. When the highest level is reached,
the volume level cycles back down to the lowest.