Uniden EXAI 7248 SERIES Owner's Manual page 56

Symptom
The handset doesn't ring or
receive a page.
Severe noise interference.
The Caller ID does not display.
The answering system does not
work.
The answering system does not
record any messages.
Messages are incomplete.
[ 5 5 ] A D D I T I O N A L I N F O R M A T I O N
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (see page 50).
• Check the battery pack to ensure there is a secure connection.
• Make sure ringer volume isn't set to turned "off."
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move the base to another location or turn off the source of interference.
• The call was answered before the second ring.
• The call was placed through a switchboard.
• Charge the handset.
• Your Caller ID service may not be active; contact your local telephone service provider.
• Make sure the AC adapter is plugged into wall outlet.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
Suggestion
w w w . u n i d e n . c o m