Find Handset; Tone Dialing Switch-Over - Uniden DXAI5688 Series Owner's Manual

Find.Handset
To locate a lost handset, press [find hs] on the base. All registered handsets
will beep for 60 seconds. The beeping will stop when any handset key is
pressed or when [find hs] is pressed. The handset will also stop beeping
automatically when an incoming call is received.
Tone.Dialing.Switch-over
If your telephone company requires pulse dialing, you can temporarily switch over to
tone dialing after the call connects. This feature is useful when you need tone dialing to
use automated such as telephone bank tellers, telephone prescription refills, customer
support menus, etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call
connects, press [ /tone/ ]. Any digits you enter from then on will be sent as tone dialing.
When this particular call ends, the phone automatically returns to pulse dialing mode.
28