Maintenance; Specifications; Battery Replacement And Handling - Uniden WDSS 5355 Series Owner's Manual

Maintenance

Specifications

Operating Temperature
AC Adapter Part Number
AC Adapter Input Voltage
AC Adapter Output Voltage
Battery Part Number
Battery Capacity
Notes:
• Use only the supplied AC adapters.
• Be sure to use the proper adapter for the base and any chargers.
• Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire
or electrical hazard.
• Do not place the base in direct sunlight or subject it to high temperatures.

Battery Replacement and Handling

With average use, your phone's battery should last approximately one year. To order replacement batteries,
please visit the customer support page on our website; www.uniden.com.au for Australia, www.uniden.co.nz for
New Zealand.
Caution:
• Use only battery pack BT-446.
• Do not remove the batteries from the handset to charge them.
• Never throw the battery into a fire, disassemble, or heat them.
• Do not remove or damage the battery casing.
32° F to 122° F (0° C to 50° C)
Base: AAD-041S(M)
Charger: AAD-600S(M)
Base: 240V AC, 50 Hz
Charger: 240V AC, 50 Hz
Base: 9V DC @ 350mA
Charger: 9V DC @ 210mA
BT-446
3.6V DC @ 800mAh
47