Wall Mounting The Base - Uniden WDSS 5355 Series Owner's Manual

Wall Mounting the Base

This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches on the base top.
2) Plug the AC adapter into the
3) Wrap the AC adapter cord inside the molded wiring channel as
shown.
4) Plug the AC adapter into a standard 240V AC wall outlet.
5) Plug the telephone cord into the
6) Plug the telephone cord into the telephone wall jack.
7) Align the mounting slots on the base with the mounting posts on
the wall. Then push in and down until the phone is firmly seated.
Note:
To mount the phone directly on the wall, insert two #10 screws
(minimum length of 35mm, not supplied) into the wall, 100mm
apart; leave the screw heads 3mm away from the wall to allow
room for mounting the phone. Be sure the wall is capable of
supporting the weight of the phone, and use the proper type of
anchoring device for the wall material.
DC IN 9V jack.
TEL LINE jack.
16
Wall plate
AC adapter (supplied)
AC outlet