Table of Contents
Advertisement
!
Use only the genuine
Uniden Battery supplied
with your phone.
Replacement batteries
are also available
through the Uniden
Parts Department.
8
USING YOUR PHONE
Battery Maintenance
Battery Use Time (per charge)
From fully charged
6 hours continuous use.
10 days when the handset is in the standby mode.
When the Battery Charge becomes Low
If the phone is not in use, 'Low Battery' indicator flashes and none of the keys
will operate. If the phone is in use, 'Low Battery' indicator flashes and the
handset beeps. Complete your conversation as quickly as possible and return the
handset to the base unit for charging.
talk/batt low
talk
abc
1
2 3
Cleaning the Battery contacts
To maintain a good charge, it is important to clean the battery contacts on the
handset and base unit with a dry cloth or a pencil eraser about once a month.
Do not use any liquids or solvents.
Adjusting The Ringer & Earpiece Volume
Handset Ringer Tone and Volume
1. While the handset is not in use, press the
2. The phone has two ringer tones, each with two volume levels. Press the
key again until you hear the ringer tone and volume level you want.
vol/ringer
When you hang up, the phone keeps the last setting selected.
Setting the Earpiece Volume
1. While you are on a call, press the
2. The phone has three receiver volume levels. Normal, High and Max. Press the
key again until you hear the volume level you want.
vol/ringer
When you hang up, the phone keeps the last setting selected.
Setting the Base Speaker Volume
To adjust the Speaker Volume on the Base Unit, slide the switch on the side of the
base until the desired level is reached.
Setting the Base Ringer Volume
To adjust the Ringer Volume of your telephone, move the ringer switch, located at
the rear of the telephone, to the desired level - off/low/high.
• You cannot overcharge the battery.
redial flash
• You may return the handset to the
def
vol/ringer
charger after each call or when the
battery is low.
key.
vol/ringer
key.
Advertisement
Table of Contents
