Answering A Transferred Call - Uniden WDSS 5355 Series Owner's Manual

From the base:
[hold/int'com].
1) During a call, press
2) Press [1] through [9], [0] to select the handset you want to talk with or press [
handsets. To cancel the transfer, press [hold/int'com].
3) When another handset accepts the transferred call, your call will disconnected. If you want to rejoin the call
press [ ].

Answering a Transferred Call

When a station receives a call transfer, it sounds a paging tone; handsets also show the ID of the station that is
paging. To accept the call transfer:
1) To answer the page and speak to the transferring
handset. If Any Key Answer is on, you can also press any key on the dial pad. If AutoTalk is on, the handset
will automatically answer the page when you pick up the handset from the cradle. On the base, press [
[hold/int'com].
2) To accept the call and speak to the caller, press
3) When you accept the transferred call, the transferring
Only the first station to answer the transfer page will be connected to the call. If the transfer page is not picked up
within one minute, the operation will be canceled.
station, press [ /flash] or [hold/int'com/xfer] on the
[ /flash] on the handset or [
station will be disconnected.
35
*
/tone] to page all registered
] on the base.
] or