Warnings And Cautions; National Approvals - Honeywell MORLEY IAS DX Series User Manual

Dimension Series

1.3 Warnings and Cautions

These instructions contain procedures to follow in order to avoid injury and damage to
equipment. It is assumed that the user of this manual has been suitably trained and is
familiar with the relevant regulations.
This panel is CE Marked to show that it conforms to the requirements of the following
European Community Directives:
The EMC Directive 2004/108/EEC, by the application of the following EMC Standards:
•
EN 61000-6-3: Electromagnetic Compatibility (EMC) Generic emission standard
for Residential, Commercial and Light industrial environments
•
EN 50130-4: EMC Product family standard: Immunity requirements for
components of fire, intruder and social alarm systems.
Low Voltage Directive 2006/95/EEC, by the application of the safety standard:
•
EN 60950-1: Safety of information technology equipment.
The Construction Products Directive 89/106/EEC, by the application of the following
standards:
•
EN 54-2: 1998, (Amd. 1 & 2): Fire detection and fire alarm systems - Control and
indicating equipment.
•
EN 54-4: 1998, (Amd. 1 & 2): Fire detection and fire alarm systems - Power supply
equipment.
EN54-2 13.7
EN54
Maximum of 512
!
sensors / manual
call points per
panel.

1.4 National Approvals

•
This equipment must be installed and operated in accordance with these instructions and the
appropriate national, regional and local regulations specific to the country and location of the
installation. Consult with the appropriate Authority Having Jurisdiction (AHJ) for confirmation of the
requirements.
All equipment is to be operated in accordance with the appropriate standards applicable
•
This equipment must be installed in accordance with these instructions and the appropriate national,
regional and local wiring regulations. In the UK the wiring must conform to the requirements of
BS7671 (IEE Wiring Regulations – Sixteenth Edition).
User Manual
•
The Dimension Series range of panels has many features that, if
used inappropriately, may contravene the requirements of EN54.
Where such a possibility may arise, a suitable warning is given with
brief details of the EN54 requirement and the relevant section to
which it pertains. A typical EN54 non-compliance warning is
illustrated.
Document No.996-148-000-5, Revision: 5
MORLEY-IAS
Page 3