General Care And Cleaning - Bushnell IMAGEVIEW HD 118328 Instruction Manual

USING THE BINOCULAR-setting the diopter adjustment
5. Rotate the right eyecup to bring the object into focus in the right side of the binocular. Avoid over-
turning or forcing the diopter adjustment. If you are unable to bring the object into focus in the right
side by rotating the eyecup, make sure the left side is still focused and that the center focus knob was not
moved from its original setting. The diopter adjustment only affects the right side.
6. The ImageView binocular optics should now be adjusted for your individual eyesight. Focusing for any
distance can now be done simply by turning the center focus knob.

GENERAL CARE AND CLEANING

Caring for the ImageView
Your Bushnell ImageView will provide years of trouble-free service if it receives the normal care you would
give any fine optical instrument.
• Avoid sharp impacts. Set the ImageView down gently on hard surfaces.
• Tug on the strap after attaching it to make sure it is securely fastened to the binocular before placing it
around your neck.
• Store your ImageView in a cool, dry place whenever possible. Remove the batteries if the ImageView will
be stored for a long period of time.
Cleaning the Optics
• Blow away any dust or debris on the lens (or use a soft lens brush).
• To remove dirt or finger prints, clean with the supplied micro-fiber cloth rubbing in a circular motion. Use
21