Table of Contents
Advertisement
Connect the Charger
1
Connect the AC adapter to the
DC IN 9V jack and to a standard
120V AC wall outlet.
2
Set the charger on a desk or
tabletop, and place the handset
in the charger with the keypad
facing forward.
3
Make sure the charge LED
illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the charger's contacts.
Caution: To avoid risk of fire or shock, use only the supplied AD-0005
AC adapter. Do not use any other AC adapter.
4
Charge the handset for 15-20 hours before using.
Register the Handset
YOU NEED TO REGISTER THE TCX805 TO THE MAIN BASE BEFORE USE!
If the handset was registered to a different base, you
must de-register the handset before you can register it
to a new base. (See page 5.)
For Main Base Models TRU8860, TRU8865, TRU8866, TRU8880 and
TRU8885
1
Be sure the handset battery is
fully charged.
2
With the main base in standby
mode (i.e., not being used), place
the expansion handset in the main
base to begin registration.
3
While the handset is registering,
H an d se t R e gi s te ri n g
appear in the handset LCD. When
R eg i st r at i on Co mp l et e
displayed, the handset has been
registered to the base.
R eg is t ra t io n F a il ed
If
appears, please try these steps
again.
1
TCX805
Handset
Charger
2
Place the TCX805
handset in the main
will
base to register.
is
3
–
–
4
Charge the handset
for 15-20 hours.
TCX805
Handset
Main Base
TCX805 Handset
+
Main Base
Advertisement
Table of Contents
