Step 2: Connect The Charger; Step 3: Register The Handset - Uniden TCX860 Owner's Manual

Step 2: Connect the Charger

1
Connect the AC adapter to the
DC IN 9V jack and to a standard
120V AC wall outlet.
2
Set the charger on a desk or
tabletop, and place the handset
in the charger with the keypad
facing forward.
3
Make sure the charge LED
illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the charger charging contacts.
• Use only the supplied AD-0005 AC adapter. Do not use
any other AC adapter.
• Place the charger close to the AC outlet so that you can
unplug the AC adapter easily.
4
Charge the handset for 15-20 hours before using.

Step 3: Register the Handset

YOU NEED TO REGISTER THE TCX860 TO THE MAIN BASE BEFORE USE!
1
Be sure the handset battery is
fully charged.
2
With the main base in standby
mode (i.e., not being used),
place the expansion handset in
the main base to begin
registration.
3
While the handset is
registering,
R eg i st e ri n g
the handset LCD. When
R eg i st r at i on Co mp l et e
displayed, the handset has
been registered to the base.
R eg is t ra t io n F a il ed
If
appears, please try these steps
again.
Ha nd s et
will appear in
1
TCX860
Handset
Charger
2
Place the TCX860
handset in the main
base to register.
is
3
– –
4
Charge the handset
for 15-20 hours.
TCX860
Handset
Main Base
TCX860 Handset
+
Main Base