AC power is available to connect the handset charging cradle. IMPORTANT The TCX860 expansion handset will not operate unless it has been registered to your main base. This manual describes how to set up and connect your new handset; for instructions on operating your new handset, refer to the owner's manual supplied with your main base.
Place the handset in the charging cradle with the keypad facing forward. • Use only the Uniden battery (BT-446) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department. (See page 2.) •...
AC adapter easily. Charge the handset for 15-20 hours before using. Step 3: Register the Handset YOU NEED TO REGISTER THE TCX860 TO THE MAIN BASE BEFORE USE! Be sure the handset battery is fully charged. With the main base in standby mode (i.e., not being used),...
Using Your Expansion Handset Now that your new handset is registered, it can perform all the same functions as the handsets originally included with your phone. With your new handset, you can • Transfer calls or intercom between handsets and base •...
Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. Uniden works to reduce lead content in our PVC coated cords in our products and accessories. Warning! The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.