Table of Contents
Advertisement
You must subscribe to
Caller ID on Call Waiting
in order to use this
feature.
27
You must subscribe to the Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view
the caller's name and phone number on the display before you
answer the phone.
The handset displays the phone number of the incoming call, the
name, time, and the number of calls. Additionally, you can dial the
displayed number, and store the information for memory dialing.
Setting Caller ID options
There are three Caller ID setup options available; they are AutoTalk,
CIDCW (Caller ID on Call Waiting), and Area Code.
AutoTalk allows you to answer the phone without pressing the
button. If the phone rings when AutoTalk is on, simply
remove the handset from the base and the phone automatically
answers the call. Or, if the handset is not on the base, press any key
(except
AutoTalk is off, you must press
Caller ID on Call Waiting (CIDCW) performs the same as regular
Caller ID on a call waiting number.
You must subscribe to CIDCW from your phone company in
order to use this feature.
If you enter 3-digit area code number in the Area Code option,
your local area code does not appear in Caller ID messages. When
reviewing Caller ID messages, you will see only the local seven digit
number. For calls received form outside your local area code, you will
see a full 10-digit number.
If your calling area requires 10-digit dialing, do not
program this option.
To change your Caller ID options:
1
Press
. The following
screen appears.
2
Use the
and
cursor to the selection that you would like to change.
Press the
Auto Talk and CIDCW.
3
When you wish to enter Area Code, press
to move the cursor to select "Area Code". Then
key
press
number keypad
press
4
After you have made your selections, press
the handset to the charging cradle.
) to answer the call. If the phone rings when
to answer the call.
1 Auto Talk:Off
2 CIDCW
3 Area Code:
keys or a number key (1-3) to move the
key to toggle between On and Off for
and enter the 3 digits area code by using the
-
. After entering Area Code,
.
:On
or the number
and return
Advertisement
Table of Contents
