Table of Contents
Advertisement
If you have wall mounted
the base, you must remove
the beltclip to charge the
handset facing forward.
Beltclip installation
To attach the beltclip
Insert the beltclip into the
holes on each side of the
handset. Press down until it
clicks.
Your phone may be used with
an optional headset, the Uniden
HS910. To use this feature,
simply plug the headset plug
into the headset jack. Your
phone is ready for hands-free
conversation.
To remove the beltclip
Pull both sides of the beltclip
to release the tabs from the
holes.
36
Advertisement
Table of Contents
