Cleaning The Battery Contacts - Uniden EXS 2060 Owner's Manual

900 mhz digital spread spectrum technology
Hide thumbs Also See for EXS 2060:
Table of Contents

Advertisement

Even when the battery
pack is not being used, it
will gradually
discharge over a long
period. For optimum
performance, be sure to
return the handset to the
base unit after a
telephone call for
charging the battery.
11
Battery use time (per charge)
From fully charged
• Six hours coutinuous use.
• Ten days when the handset is in the standby mode.
When the battery charge becomes low
When the voltage of battery pack
in the handset is very low and
needs to be charged, the phone is
programmed to eliminate
functions in order to save power. If the phone is not in use,
"Low Battery" flashes and none of the keys will operate. If the
phone is in use, "Low Battery" flashes and the handset beeps.
Complete your conversation as quickly as possible and return the
handset to the base unit for charging.

Cleaning the battery contacts

To maintain a good charge, it is important
to clean the battery contacts on the
handset and base unit with a dry
cloth about once a month.
Do not use any liquids or solvents.
Low Battery

Advertisement

Table of Contents
loading

Table of Contents