Entering the Local Area Code
Please refer to the foldout in front of your operating guide for key positions.
If you do not press a key within 20 seconds, the Handset beeps and the phone
returns to standby.
You must enter your local area code for the Caller ID redial features to work
properly.
To enter your local area code:
1. Remove the Handset from the Base Unit.
2. Press function twice.
3. Enter your local area code. For
example, 817 .
4. Press mem . A confirmation tone sounds
and the display remains on for two
seconds.
5. Place the Handset on the Base. The Charge LED on the Base Unit will
blink to indicate that the area code is stored.
To delete your local area code:
1. Remove the Handset from the Base Unit.
2. Press function twice.
3. Press chan/del three times.
4. Press mem . A confirmation tone sounds
and the display remains on for two
seconds.
5. Place the Handset on the Base Unit. The Charge LED on the Base Unit
will blink to indicate that the setting is stored.
AREA CODE
1-
AREA CODE
1-817
STORING
6 CALLS
AREA CODE
1-817
AREA CODE
1-
DELETING
1-817
25