Entering The Local Area Code - Uniden XCI-660 Instruction Manual

If the Base Unit loses power while the
Handset is off the Base, the Digital Code may
be erased. When this happens, the Handset
will not function.
To reestablish communication between the
Handset and Base Unit:
1. Restore power to the Base Unit.
2. Place the Handset back on the Base Unit.
3. The Battery icon will
blink to indicate that
the Digital Security
Code is set.

Entering the Local Area Code

Please refer to the foldout in front of your
operating guide for key positions.
You must enter your local area code for the Caller
ID redial features to work properly.
To enter your local area code:
1. Remove the Handset from the Base Unit.
2. Press flash/function
twice.
3. Enter your local
area code. For
example, 817.
4. Press mem. A
confirmation tone
sounds and the
display remains on
for two seconds.
5. Place the Handset
on the Base. The
Battery icon will
blink to indicate that
the area code is
stored.
TOTAL CALLS
AREA CODE
AREA CODE
STORING
6 CALLS
TOTAL CALLS
29
10
1-
1-817
10