Traveling Out-Of-Range; Selecting A Different Channel; Flash And Call Waiting - Uniden EXAI398 Series Owner's Manual

Traveling Out-of-Range

During a call, as you begin to move your handset too far from your base unit, noise increases.
If you pass the range limits of the base unit, your call will terminate within 5 minutes.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the phone´s
channel for clear operation. This function works only when the phone is in use.
Press delete/channel. "
another channel. For more information on interference, refer to page 50.
Page
To locate the handset (while it's off the base), press find hs on the
base. The handset beeps for 60 seconds.
Paging is canceled when pressing any handset key, find hs on the base
or the handset is returned to the base.

Flash and Call Waiting

www.uniden.com
" appears on the display, indicating the phone is changing to
If you have "Call Waiting" service and a call waiting tone sounds
while you are on a call, press talk/flash to accept the waiting call.
There is a short pause, then you will hear the new caller. To return to
the original caller, press talk/flash again.
You must subscribe through your local telephone company to receive Call
Waiting Service.
• The UltraClear Plus TM
true compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20
different channels,
provides you with the
best possible reception
during all your
conversations.
• Paging is also canceled
when the phone receives
an incoming call.
B A S I C S [ 17 ]