Editing A Stored Name And/Or Phone Number - Uniden EXAI398 Series Owner's Manual

Editing a Stored Name and/or Phone Number

1) Press and hold mem until "
2) Press the vol/ring/ or vol/ring/
(0 - 9) to select the memory location you would like to edit.
3) Press select.
The following screen appears with the memory location number that
you have selected in the display.
4) Press the vol/ring/ or vol/ring/
then press select. The following screen appears. The cursor flashes
indicating that the display is ready for the name to be edited. When a
name has not been stored, the cursor appears at the beginning of the
second line.
*
5) Use the number keys,
(See page 18.) To edit only the phone number, skip this step.
6) Press select. The following screen appears.
The cursor flashes indicating that the display is ready for the number
to be edited.
7) Use the number keys, redial/pause or delete/channel to edit the phone number.
The phone number cannot exceed 20 digits. (See page 19.)
If you don't want to change the phone number, skip this step.
8)Press select. You hear a confirmation tone and the following display
appears. The memory storage is complete.
For example, if you store a name and number into memory location
number 1, the display shows "
seconds, "
9)Press end to return to standby mode.
www.uniden.com
" is displayed.
key, or enter a number
key to select "
/tone / , #/ , or delete/channel to edit the name.
" is displayed.
",
". After about 2
M E M O R Y D I A L I N G [ 23 ]