Steps For Entering Names And Special Characters - Uniden EXAI398 Series Owner's Manual

If the next character uses
the same number key, you
must press # /
to move
the cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
[ 20 ] M E M O R Y D I A L I N G

Steps for Entering Names and Special Characters

Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order: Upper
case letters first, lower case letters next and finally the number corresponding to the key.
If you make a mistake while entering a name
*
Use the /tone/ or #/
Press delete/channel to erase the wrong character, then enter the correct character.
To delete all characters, press and hold delete/channel.
For example, to enter Movies.
1) Pick up the handset. Press and hold mem.
2) Enter a number or press the vol/ring/
3) Press select. (When there is information already stored in the selected memory location,
¨ ¨ is displayed. See page 23 for information on "Editing a Stored Name
and/or Phone Number".)
4) Press 6 then press #/
to the right.
5) Press 6 six times.
6) Press 8 six times.
7) Press 4 six times.
8) Press 3 five times.
9) Press 7 eight times.
10) When finished, press select.
To continue to store the telephone number, proceed to step 6 on page 19.
key to move the cursor to the incorrect character.
or vol/ring/
to move the cursor
key to select a memory location.
Number of times key is pressed
keys 1 2 3 4 5 6
1
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
0
www.uniden.com
7 8 9
(blank)