Transferring A Call; Redialing The Last Dialed Number - Uniden DXAI4288-2 Owner's Manual

Uniden dual handset cordless telephone and answering system owner's manual dxai 4288-2
Hide thumbs Also See for DXAI4288-2:
Table of Contents

Advertisement

Transferring a Call

Your cordless phone allows you to transfer outside calls from handset to handset; only one
handset at a time can talk with an outside caller. The second handset cannot go off hook to
listen to conversations or make an outgoing call while the other handset is in use.
To transfer a call
1) During a call, press the delete/transfer key. The call will
automatically be placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone
stops. To cancel the transfer and return to the caller, press the
delete/transfer or talk/flash key on the handset.
To receive a transfer call
Pick up the handset from the cradle (when AutoTalk is set to on),
or pick up the handset and press the talk/flash key to answer
the transferred call. Additionally, you can answer the transferred
call by pressing
/tone/
*
AutoTalk is set to on).

Redialing the Last Dialed Number

1) Remove the handset from the cradle.
2) Press the talk/flash key.
3) Listen for the dial tone.
4) Press the redial/pause key.
OR
1) Remove the handset from the cradle.
2) Press the redial/pause key.
3) Press the talk/flash key.
w w w . u n i d e n . c o m
, #/
or any number key, (when
note
If you transfer a call and
it is not picked up after
5 minutes, the call will
be disconnected.
U S I N G Y O U R P H O N E [ 2 0 ]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxai 4288-2 series

Table of Contents