Canon SELPHY SQUARE QX10 Getting Started page 109

A charging error occurs. (STATUS lamp: blinks slowly red,
CHARGE lamp: blinks slowly green)
• Charging will pause when the printer is a certain temperature or higher.
This is not a malfunction. Disconnect the battery charger, turn off the
power, and wait for the printer to cool down.
Charging errors will occur more easily when printing continuously, when
the ambient temperature is high, and when the inside of the printer is hot.
Charging takes a long time or a charging error occurs. (STATUS
lamp: blinks quickly red, CHARGE lamp: blinks quickly green)
• When the printer has not been used for a long period of time, the
charging time may increase or a charging error may occur. If this
happens, charge the battery again.
• Use the specifi ed battery charger. (= 11)
• If the problem is not resolved, contact a Customer Support Help Desk.
Printing
Printing is not possible.
• Check that the power is turned on. (= 7)
• Check that the ink cassette and paper are loaded correctly.
(= 7, = 8)
• Check that the ink sheet is not loose. (= 4)
• Check that paper other than the specifi ed paper is not being used.
(= 3)
• If the ink cassette has run out, replace it with a new ink cassette. If there
is no paper, load the paper. (= 7, = 8)
Images cannot be printed cleanly.
• Check that the ink sheet and paper are not dirty.
• Check that dust and dirt have not adhered inside the printer.
• Check that condensation has not occurred in the printer.
• Check that the printer is not installed near equipment that emits
electromagnetic waves or strong magnetic fi elds.
13