When you have this
problem...
The.answering.system.does.
not.record.any.messages.
The.answering.system.
doesn't.say.what.time.
messages.were.recorded.
Messages.are.incomplete..
I.can't.hear.base.or.handset.
speaker.during.call.screening.
or.message.playback.
I.can't.access.answering.
system.from.a.remote.
phone..
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
•
You.lose.a.handset.and.purchase.a.new.one.
•
You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
•
You.are.unable.to.register.any.handsets.to.the.base.
•
When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as."Handset.#4".but.you.only.have.two.handsets.)
•
When.you.are.instructed.to.by.one.of.Uniden's.call.center.representatives.
•
The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages.(see.page.49).
•
Checking.to.see.that.the.message.record.time.is.not.set.to.announce.only.(see.
page.46).
•
Checking.to.see.if.you.have.set.the.time.(see.page.46).
•
The.incoming.messages.may.be.too.long..Ask.callers.to.leave.a.brief.message.
•
The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages.(see.page.49).
•
Adjusting.the.speaker.volume.on.the.base.or.handset.(see.page.38).
•
Checking.to.see.if.the.call.screen.feature.is.set.to.on.(see.page.47).
•
Checking.to.see.if.you.are.using.the.correct.PIN.number.(see.page.50).
•
Checking.to.see.if.the.touch-tone.phone.you're.using.can.transmit.the.tone.for.at.
least.two.seconds..If.it.cannot,.try.using.a.different.touch-tone.phone.
56
Try...