Charging.the.handset - Uniden DECT2088 Series User Manual

Charging the Handset
Use.only.the.Uniden.PS-0007.AC.adapter.supplied.with.your.cordless.telephone.
Connect the AC Connect the AC
adapter to the adapter to the
DC IN 9V jack and DC IN 9V jack and
route the cord route the cord
through the molded through the molded
wiring channel. wiring channel.
Place the handset in the charging Place the handset in the charging
cradle with the display facing forward. cradle with the display facing forward.
What if the charge LED doesn't light up? What if the charge LED doesn't light up?
Reseat the handset; make sure the Reseat the handset; make sure the
contacts on the bottom of the handset are contacts on the bottom of the handset are
lined up with the contacts in the cradle. lined up with the contacts in the cradle.
Check the AC adapter connection. Check the AC adapter connection.
Make sure you are not using an outlet Make sure you are not using an outlet
that's controlled by a wall switch. that's controlled by a wall switch.
Charge your handset at least 15 to 20 hours before plugging into the phone line. Charge your handset at least 15 to 20 hours before plugging into the phone line.
Connect the AC adapter to a Connect the AC adapter to a
standard 120V AC wall outlet. standard 120V AC wall outlet.
DO NOT use an AC outlet DO NOT use an AC outlet
controlled by a wall switch. controlled by a wall switch.
7
Make sure that the charge Make sure that the charge
LED illuminates when the LED illuminates when the
handset is seated. handset is seated.