Table of Contents
Advertisement
Expanding Your Phone
Adding accessory handsets
Your.phone.supports.a.total.of.six.cordless.handsets,.including.any.that.were.supplied.with.your.phone..You.can.now.
place.a.fully-featured.cordless.handset.anywhere.AC.power.is.available.to.connect.the.charging.cradle.
•
Your.phone.is.compatible.with.the.DCX200.and.DCX300.accessory.handset.
•
For.instructions.on.connecting.the.charging.cradle,.see.page.7.
•
If.you.purchase.any.accessory.handsets.separately,.you.must.register.the.handsets.to.the.base.before.you.can.
use.them..(Accessory.handsets.that.come.packaged.with.a.base.are.already.registered.to.that.base.)
Registering accessory handsets
When.charged,.registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.display:
To.register.a.DCX200.or.DCX300.accessory.handset:
)
Charge.the.handset.for.5-20.hours.
2)
With.the.phone.in.standby,.press.[Menu/Select].on.the.base..
3)
Move.the.cursor.to.select.the.REGISTER.HANDSET.menu,.and.then.press.[Menu/Select]..HANDSET.
REGISTERING.will.appear.
4)
On.the.handset,.press.and.hold.[#].until.the.handset.beeps.and.displays.HANDSET.REGISTERING.
5)
When.the.handset.has.registered.to.the.base,.the.LCD.will.display.REGISTRATION.COMPLETE.then.show.the.
handset.ID.number..
If.the.display.shows.REGISTRATION.FAILED,.repeat.the.process.again.
Note:. If.a.handset.has.ever.been.registered.to.a.base,.reset.the.handset.before.you.register.it.to.a.new.base.(see.
Resetting.the.Handset.on.page.56)..Or.to.use.multiple.bases,.see.the.next.section.
↔
.
..
.
2
Advertisement
Table of Contents
