Using your phone
Make a call
1. Press
. The
symbol is displayed.
When you hear the dial tone, dial the number
you want. The number is shown in the display.
After a short delay the call timer will start timing
the call.
Adjust the earpiece/receiver volume during a
call
1 Press
or
to adjust the volume.
cid
There are five levels.
Preparatory dialling (pre-dial)
1 In standby mode, enter the number to be dialed.
The number is displayed.
You can enter numbers up to 32 digits long.
clear
Press
to delete any incorrect digits.
Press and hold
clear
to delete all digits.
2 Press
to dial the displayed number.
Handset range
Up to 300 metres outdoors and up to 50 metres
indoors (in ideal conditions).
If the handset is too far away from the base, during
standby,
appears and the
Searching
flash. During a call you will hear a warning tone.
You will need to mover closer to the base for
clearer reception and to avoid being disconnected.
Call timer
When you make or receive a call, a short while after
the line is connected the call timer will show the
duration of the call in the display in hours, minutes
and seconds.
[12]
symbol will