Intercom/Call Transfer Feature - Uniden DCT 5285 Owner's Manual

Intercom/Call Transfer Feature

Intercom and Call Transfer features are available for your phone.
• If the party is busy or out of range, you will hear a beep and the handset returns to
the standby mode.
• If any of the following occurs, the operation will be canceled.
- Press talk/flash or speaker on the handset, and
- Receive an outside/intercom call or page (while selecting the other handset).
• When the party does not answer within 1 minute, Intercom or Call Transfer is canceled.
Intercom
From handset to handset or to the base
1) Press intercom/hold in the standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press volume/
press the OK soft key.
If you select " ", all handsets will be paged.
An intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press talk/flash,
intercom/hold, or the ANSWER soft key (or int'com/hold or
Or press any number key,
up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press the end key or the END soft key on either
handset (or press int'com/hold on the base).
From the base to a handset
1) Press int'com/hold on the base in the standby mode.
2) Select the handset you want to talk with by pressing the number key (1-4).
To page all the handsets press
3) Follow the steps 3-4 under "From handset to handset or to the base".
(talk) on the base.
L M
or , then
/tone/ t , or # / s (when Any Key Answer is On), or pick
/tone/ t .
(talk) on the base).
E X PA N D I N G Y O U R P H O N E [ 67 ]