Placing A Call On Hold; Redialing A Call - Uniden DCT 5285 Owner's Manual

• If the number
exceeds 32 digits,
only the first 32
digits are retained
in redial memory.
• If the redial memory
is empty, you will
hear a beep.
• If you have not
pressed any key for
30 seconds, the
phone returns to the
standby mode.
• If you press the end
key, the operation
is canceled.
[ 32 ] B A S I C S

Placing a Call on Hold

1) During a call, press intercom/hold (or int'com/hold
on the base). The call will be put on hold.
Once 10 seconds has passed or when you press the
the call will be put on hold.
2) To talk to the caller, press talk/flash or speaker on a
handset (or (talk) on the base). The phone will
return back to the call.
• You can hold a call for 5 minutes, when 5 minutes has passed, the call is disconnected and the
phone returns to the standby mode.
• While a call is on hold, CIDCW can not be received.

Redialing a Call

The last three phone numbers dialed can be quickly
redialed.
Redialing from Standby Mode
1) Press the CID RDL PB soft key in the standby mode.
L
2) Press volume/ or
then press the OK soft key. The phone number that
was last dialed appears in the display.
L
3) Press volume/ or
three phone numbers dialed.
4) Press talk/flash or speaker. The selected number
is dialed.
5) To hang up, press the end key.
M
to select "
M
to toggle through the last
end
key,
",
or
or