Motorola APX 1000 User Manual page 45

You Hear Tone Name
Central Echo
Long, Medi- Volume Set
um-Pitched
Emergency Exit
Tone
A Group of Failsoft
Medium-
Automatic Call Back
Pitched
Console Acknowledge
Tones
Received Individual
Call
Call Alert Sent
Short, High- Low-Battery Chirp
Pitched
Tone
(Chirp)
Two High- GPS Fails
Pitched
Tones
Ringing Fast Ringing
Enhanced Call Sent
Phone Call Received
Gurgle Dynamic Regrouping
Talk Permit
Unique, New Message
Low-Pitch-
ed Chirp
Unique, Priority Status
High-Pitch-
ed Chirp
Unique MFK Enters Secon-
Low-High dary Feature
Tone
Unique MFK Exits Secondary
High-Low Feature
Tone
Heard
When central controller has received a request from a
radio.
When volume is changed on a quiet channel.
When exiting the emergency state.
When the trunking system fails.
When voice channel is available from previous request.
When status, emergency alarm, or reprogram request
ACK is received.
When Call Alert or Private Call is received.
When Call Alert is received by the target radio.
When battery is below preset threshold value.
When the GPS fails or loses signal.
When system is searching for target of Private Call.
When waiting for target of Private Call to answer the
call.
When a land-to-mobile phone call is received.
(When PTT button is pressed) a dynamic ID has been
received.
(When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
When a new message is received.
When a priority message is received.
When MFK is toggled to secondary feature.
When MFK is toggled to exit secondary feature and re-
turn to primary feature or when secondary function tim-
er expires.
MN000255A01-BL
Status Indicators
45