Additional Information; Changing The Digital Security Code - Uniden 2315+2 Quick Start Manual

UP409ZH (WDECT2315-2) OM 12/22/05

CHANGING THE DIGITAL SECURITY CODE

The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary. In the rare situation that you
suspect another cordless telephone is using the same security code, you can change
the code.
To change the digital security code:
1. Perform the "System Reset" menu options ("De-register the Handset" and
"Replacing the Base Setting") for all the handsets you have (see page 19).
2. To register all the handsets do the following steps:
1) Place a handset, one at a time in the base.
2) Registration starts automatically.
While registering
3) When the registration is complete,
4) Repeat steps 1 - 3 for another handsets.
If the registration fails,
above again.
3:29 PM Page 45
appears in the display.
appears in the display.
appears in the display. Try the steps
[ 45 ]