Toro Groundsmaster 4500-D Operator's Manual page 2

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Please refer to the engine manufacturer's information
included with the machine.
Introduction
This machine is a ride-on, rotary-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed for
cutting grass on well-maintained lawns in parks, golf
courses, sports fields, and on commercial grounds. It
is not designed for cutting brush, mowing grass and
other growth alongside highways, or for agricultural
uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the right front frame of the product. Write the
numbers in the space provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
g036837
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g000502