Toro Groundsmaster 4500-D Operator's Manual page 16

High-Low Speed Control
The switch (Figure 10) allows the speed range to
increase for transporting the machine. To switch
between the High and Low speed ranges, raise the
cutting units, disengage the PTO and the cruise
control, put the traction pedal into the N
position, and move the machine at a slow speed.
Note:
The cutting units do not operate and/or cannot
be lowered from the transport position when the
switch is in the high range.
Lift Switches
The lift switches raise and lower the cutting units
(Figure 10). Press the switches forward to lower the
cutting units and rearward to raise the cutting units.
When starting the machine, with the cutting units in
the down position, press the lift switch down to allow
the cutting units to float and mow.
Note:
The cutting units do not lower while in the
high-speed range and they do not raise or lower if you
are out of the seat while the engine is running. Also,
the cutting units lower with the key in the O
and you are in the seat.
Cruise-Control Switch
The cruise-control switch locks in the pedal position
to maintain the desired ground speed
Pressing the rear of the switch turns off the cruise
control, the middle position of the switch enables the
cruise-control function, and the front of the switch sets
the desired ground speed.
Note:
Pressing either brake pedal or moving the
traction pedal into the reverse position, for 1 second,
also disengages the pedal position.
Light Switch
Press the lower edge of the switch
on the lights. Press the upper edge of the switch to
turn off the lights.
Power Point
Use the power point (Figure
12 V electrical accessories.
EUTRAL
position
N
(Figure 10).
(Figure 10) to turn
11) to power optional
1. Power point
Bag Holder
Use the bag holder for storage
Seat Adjustments
Seat-Adjustment Lever
Move the seat adjustment lever on the side of the
seat outward, slide the seat to the desired position,
and release the lever to lock the seat into position
(Figure 12).
1. Weight gauge
2. Weight adjustment lever
3. Seat adjustment lever
16
Figure 11
2. Bag holder
(Figure 11).
Figure 12
4. Seat-back adjustment
lever
5. Armrest adjustment knob
g036845
g024916