Toro Groundsmaster 4500-D Operator's Manual page 17

Armrest Adjustment Knob
Rotate the knob to adjust the armrest angle
12).
Seat-Back Adjustment Lever
Move the lever to adjust the seat-back angle
12).
Weight Gauge
The weight gauge indicates when the seat is adjusted
to the weight of the operator
height by positioning the suspension within the range
of the green region.
Weight Adjustment Lever
Use this lever to adjust the seat to your weight
12). Pull the lever up to increase the air pressure and
push the lever down to decrease the air pressure. The
proper adjustment is correct when the weight gauge is
in the green region.
(Figure
(Figure
(Figure 12). Adjust the
(Figure
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics and other information about the machine
(Figure 13). There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen at any time by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to exit any menu that you are currently using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
•
Beeper—activated when lowering the cutting units
or for advisories and faults.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
17
Figure 13
3. Middle button
4. Left button
g020650