Troubleshooting - IKEA MATMÄSSIG 303.688.22 Manual

ENGLISH
Removing the residues and stubborn
residues
1. Food containing sugar, plastics, tin foil
residues should be removed at once,
best tool for cleaning glass surface is a
scraper (not included with the
appliance). Place a scraper on the glass
ceramic surface at an angle and remove
residues by sliding the blade over the

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
The appliance cannot be ac-
tivated or is not operating.
Acoustic signal sounds, ap-
pliance deactivates.
Display is switching between
two power settings.
2. Limescale rings, water rings, fat
Possible cause
The appliance is not connec-
ted to an electrical supply or
it is connected incorrectly.
More than 10 seconds
passed since you activated
the appliance.
The Child Safety Device or
the Lock is on .
Several symbols were
touched at the same time.
One or more symbols have
been covered for longer
than 10 seconds.
Power exchange function is
reducing the power of this
cooking zone.
surface. Wipe the appliance with a
damp cloth and a little washing up
liquid. Finally, rub the appliance dry
using a clean cloth.
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
Check if the appliance is cor-
rectly connected to the elec-
trical supply. Ensure a cor-
rect installation by calling an
authorised installer.
Activate the appliance
again.
Deactivate the Child Safety
Device (See the section
"Child Safety Device" or
"Lock").
Touch only one symbol.
Uncover symbols.
See the section "Power ex-
change function".
17
Remedy