Resetting The E31N2V1; Figure 6: Gui Overview; Table 4: Gui Overview - Hitron E31N2V1 User Manual

Figure 6: GUI Overview
Table 4: GUI Overview
Primary
Navigation Bar
Main Window
1.8

Resetting the E31N2V1

When you reset the E31N2V1 to its factory defaults, all user-configured settings are
lost, and the E31N2V1 is returned to its initial configuration state.
To reset the E31N2V1, press and hold the RESET button for ten seconds. The
E31N2V1 turns off and on again, using its factory default settings.
NOTE: Depending on your E31N2V1's previous configuration, you may need to re-
configure your computer's IP settings; see
18 18
Version 1.0, 11/2017. Copyright
Version 1.0, 11/2017. Copyright
Use this section to move from one part of the GUI to another.
Use this section to read information about your E31N2V1's
configuration, and make configuration changes.
Hitron E31N2V1 User's Guide
IP Address Setup
2012 Hitron Technologies
2017 Hitron Technologies
on page 15.